Here’s more to DIY and yes, you can simply paste a smile on your face even before you have seen this new accessory. So we basically had a gold chain which we linked it to a neon pink cord that has been woven accordingly. Looking at the pictures, you’d say that this out-and-out high street fashion statement. Follow the guidelines to make this woven gold chain plus pink neon cord. We also have posted a video below for your convenience.
Of course, you can use any colour cord and then link it with your bracelet. Going step by step, we first need to get stuff like scissors, 1.5 min cord, lighter, tapes and pair of pliers. Once you have stacked all these items well within your reach, just unhook the gold chain from one of its piers so that it can be put to test. You can cut off the pliers as and how you like it. To make an ideally normal-sized bracelet, 11 inches is perfect. You can add or subtract more according to your convenience.
Now you must tape the chain on the backdrop of a flat surface. Cut the cord upto a length of 2 and half times as long as your gold chain. Now loop the cord through the bottom link. Even out the two pieces of the cord at the end of the gold chain. After this, send the rest of the cord underneath the base cord. This exercise will create a perfectly woven cord chain. Keep continuing this for a better looking cord.
Now take the rest of the cord through the first loop that was created. Now tighten both the sides. Make sure that the base cord is attached with the base cord and that the weaving takes place aptly. Make a knot at the end of the desired length of the cord. Now light the edge which will just melt onto the base itself. Go flaunting your custom-made and hand-made bracelet.